frequency modulation system monitor.
- No.:BY-403
- supplier :magic-china
- The price:negotiable
BY-403 frequency modulation system monitor.
BY-403 provides a complete solution for the FM simulation signal. The device focuses on the following functions: RF amplifier, FM modem, stereo demodulator, RDS decoder, SCA decoder, FFT spectrum analyzer. BY using the most advanced DSP technology in the field of digital processing, BY-403, it is an innovation for the former FM simulation processing performance.
BY-403 all-in-one FM modulation monitor is a broadband FM monitor that meets the requirements of the federal communications commission to measure the modulation characteristics of mono and stereo multiplexed FM transmitters. BY-403 measurement modulated signal and provide high quality output service for the traditional analog FM radio station working at 88MHz - 108MHz. The equipment can carry out the spectrum analysis of pre-demodulation and post-demodulation signal, and the internal calibration signal will monitor the detection accuracy in real time. Through a communication port, the customer can remotely monitor BY-403 via computer.
The characteristics of
Direct sampling of FM radio frequency carrier signals.
Flexible input RF frequency.
AM& synchronous measurement AM noise.
Variable bandwidth digital IF filtering.
The digital FM demodulation of 100 dB,75 mu S signal to noise ratio.
Variable bandwidth integrated filter Settings.
Digital stereo demodulation of 100 dBL/R separations.
Simulation peak and effective values of the comprehensive measurement.
RDS input, phase and complete data decoding.
Two digital SCA decoders.
RF, composite video and audio FFT spectrum analysis.
Rj-45 Ethernet interface and remote PC software.
To increase the conversion, 50 s & 75 s.
specifications
The RF input
Frequency range 88 to 108.1MHz, step 100kHz.
High level input 400 mVrms 3.5 VRMS, 50 Ω, BNC connector
Antenna input sensitivity mu 100 V, 100 Ω, F type connector, the largest 500 mV
FM demodulation
The frequency response is plus or minus 0.01 dB, 10 Hz to 100 kHz.
The signal-to-noise ratio of 100 dB, 75 s to increase.
The distortion is 0.001%, and 75 s goes to increase.
Welcome to our company hotline: 010-83549327.
Or scan the qr code below.
Pay attention to our WeChat public number baoyingkeji, and add WeChat customer service number 18601263983 to get more products and services.
TAG:   BY-403 frequency modulation system monitor.